Back to v15 Page

History of Additions and Fixes to Previous Version of WinBidPro v15

Fixes in v15.1.19

• Fixed problem in Shopdrawing window where elevations would overlap each other. (07-07-10)

• Parts List Batch Update was fixed so that replacing certain fields with zeros or blank is now working. Replacing with number and text was working fine, but the ability to blank, or zero out the fields was not.

• Job Notes field in the Final Summary report was cutting off at 276 characters. The report was reformatted to allow for roughly 700 characters.

• Note fields in the System Defaults window were not wrapping the lines of text that were typed in. These will now wrap the lines.

• Added code to prevent a \ key in a job name.

• Added code to create a folder with the job name for the elevation CAD drawings.

• Add validation for door height & width and door frame height and width. Must be less than 200 inches. This prevents problems with the drawing if mistakes are made with the door and door frame heights.

Fixes in v15.1.18

• Fixed bug when a backed up job is restored. The door leaf parts were not getting restored. (05-20-10)

• Changed the daily backup feature to make sure the "vendor name old.bak" file gets created for a vendor. (05-20-10)

• Fixed bug where Vendor name was not showing up on the Cut List report. (05-19-10)

• Added feature for the last vendor in use to be selected when the vendor list is opened when starting the program. (05-17-10)

• Fixed bug in Final Glass Report with the “Change Price” tool. Was generating a “run-time error 91” and not updating the price. (05-17-10)

• Fixed a problem with the Elevation Glass Report calculating the Block Size Total Price incorrectly (05-06-10)

• Fixed bug with Splits inside a Window and Horizontals running through a Window. Also fixed a bug with Door Head at a Window.

• Fixed an unlikely bug in the Final Glass form. Wasn't allowing a glass price to be changed after an error was displayed.

• Added a Tips button in the Doors tab for important tips about doors and frames.

• Fixed problem with glass stop material when all four sides were not used.

• Fixed problem with Alternate Vertical material, where the Add/Deduct to verticals wasn't getting applied.

• Fixed a recent bug when using a subframe entrance. The program was picking up door jamb and door head material instead of vertical and horizontal material for the opening. The cause was a syntax error in the condition that tests for a subframe in one area of the program.

• Fixed problem where program would not close properly after printing the Markup Report from the Print Reports window. When program would not close properly, it required Ending the Process in the Task Manager or rebooting in order to run the program again.

• Fixed problem where split mullions in a window above a door where not cutting to the right length if the door head was a different profile than a horizontal. Also fixed a problem with the transom stop for glass at the door head in the same situation.

Fixes in v15.1.17

• Added code to only backup a selected vendor one time per day.

• Made change to Select Vendor form to try and prevent Run-Time error when selecting a different vendor. Not a consistent problem, but one nonetheless.

• Added Catalog Page column to Parts List form to help with setting multipliers.

• Fixed problem with joint counts when entrances exist.

• The Frame Area number don't seem to be accounting for the portion of the door that extends to the ground below the bulkhead, whenever a bulkhead is used.

• Improved the “Change Frame” feature in the Jobs window so that each elevation in the job is automatically redrawn when the framing system is changed for the entire job. This ensures that the new parts are included from the new framing system, and the old parts are not. NOTE: You will still need to click the “Get Elevation Parts” button in the Optimizer window and then click Optimize to figure the new stock length counts!

• When selecting a vendor to work with, the backup process should only occur once a day. NOTE: You may need to click the Vendor Tools option at the top of the Vendors window, and select “Compact a Vendor File” once a week or so you heavily use a specific vendor. This will keep the program running efficiently and will make the backup process quicker. Also remember, you can “Compact” a vendor that you have not yet opened, not one that is currently open.

Fixes in v15.1.16

• WinBidPro will now Backup your vendor database whenever you open it. This will occur once a day, so you will find backup files in your vendor folder with the day of the week at the end of the file name. We still recommend backing up your entire vendor folder to an external device as often as possible!

• A note was added to the drawing window whenever you add a new elevation. This reminds new users that information like panels, height, and width are required before continuing.

• The Add Cut Piece window in the Optimizer was enhanced to allow you to enter fractions or decimals in the cut length field. It previously only allowed decimal sizes.

• Also in the Optimizer window, the "Used" and "Drop" values were not accurately reflecting the true material used and left over for each stock length. These numbers now account for saw cut material loss, and rounding to the nearest inch only happens with the total value to show a whole number.

• Fixed bug in Glass Stop tab of drawing window that was showing glass stop records from other jobs and elevations when a glass stop or glazing adapter was added to or deleted from the current elevation.

• Fixed Jobs window so that Edit Job Glass button is grayed out until a job is selected.

• Fixed Problem when adding horizontal above the previous horizontal. Program was finding more than a previous horizontal to reference, and ending up with the wrong height.

• Fixed Problem when trying to Cancel out of Vendor window when starting program. Have to select a vendor.

• Fixed problem in the Glass Table window where if you close the window after changing a part without clicking on a different row first, it would not save the part. The part will now get saved even if you don't click on a different row.

• Took out Head and Sill Receptor columns from Framing System list. Also took out Sort by UserID from Sort drop down.

• Fixed Null Error on elevations with Alternate Verticals that were created before v15.1.15.

• Changed CompactVendorFile sub in GlobalSubs to backup file when exiting and compact file from tools in Vendor window and when prompted.

• Fixed bug with splits in a window that occur between a horizontal in the window and the top of the elevation.

• Fixed bug with Horizontal Face Cover material. Face covers were not getting cut in between the wall jambs as they should.

• Fixed problem with “Per Elevation” misc parts not getting included in bid.

• Fixed problem with too many parts per Jamb and Vertical when tell elevations have splices.

• Fixed bug in Installation labor calculation. Perimeter caulking was figuring lineal footage for whole job for each elevation.

• Commented out Engineering dimensions on drawing when 32^nd precision is selected. The fractional and Architectural dimensions will be used instead.

• Fixed bug when a door frame with a subframe was in use, the transom glass was not being dimensioned properly.

• Fixed bug where Misc Labor Rate was getting changed randomly in the Frame labor window.

• Fixed bug that was causing door stop material to double up with tall elevations.

• Fixed bug when a split it added in a window above a door with a sub frame, the split was the wrong length because it was based on the profile of the sub frame head, and not the horizontal directly above it.

• Fixed error that can occurs when an invalid split is entered.

• Fixed problem when using a split with horizontals inside a window above a door (transom). Lines would appear intersected at some horizontals showing there was a problem. The program was actually including too much horizontal material in this situation.

• Fixed bug where stock length door jamb material was not splicing correctly in tall elevations.

Fixes in v15.1.15

• Added block size info to Elevation Glass Report. Changed Elevation Glass printed report to include block size info and sub totals for different glass types.

• Adding an Edit Job Glass button to the Jobs window. This will allow user to change glass sizes after glass has been added to elevations.

• Fixed problem introduced in .14 update for rounding stock length door cuts affecting door drawing in elevations.

• Added ability to show dimension for sub sill on right site of drawing.

• Added dimension for overall elevation height when including an arch top.

• Fixed bug in Entrances form that prevented the filter bar fromworking.

• Added note to Rake window to work from left to right.

• VectorDraw Convert now installs silently when the WinBidPro software is installed, not when you first run the program.

• Added “Install from Web” under Vendors in menu tree.

• Changed the program so that it defaults to opening the vendor window when starting.

• Fixed bug when adding alternate verticals and using the < or > feature. The program was applying the add or deduct from the first part to the rest of the parts in the list.

• Added Job Name to frmElevList_Load sub. Added, Me.Caption = "Elevations for Job: " & sJobName to the end of load sub.

• Fixed Edit Date in Jobs window so that it shows the correct date.

• Fixed bug where glass stop records from other elevations would show up the the list inside the Stop tab after adding or deleting glass stops or glazing adapter.

Fixes in v15.1.14

• Added code to fix dimension problem with detail drawings in certain vendors. Dimensions would change to decimal value and show up too large.

• Changed Final Glass Export to GTS export feature to match the latest import filter for GTS 's Glaziers Edition software.

• Fixed problem with changing the panel height in the last panel of an elevation. Wall jamb was not changing to the height of the panel.

• Fixed problem where Parts from doors and door frames were getting wiped out when Framing System was changed for a whole job.

• Fixed “subscript out of range” error in ShopDrawing tool.

• Fixed rounding problem for stock length door parts. Problem was showing up in the Optimizer window

• Fixed “Units” message at bottom of program window when 32^nd precision is set in the Drawing Settings window. Also corrected rounding problem with text in the cut pieces section of the Optimizer when 32^nd precision is set.

Fixes in v15.1.13

• Added “for Glass” to the Add to Daylight Dimensions heading in the Framing System Parts window.

• Fix potential problem when changing the CAD program used to open drawings. A folder name that contained the letters EXE was causing the path of the CAD program to be saved incorrectly.

• Fixed “EOF or BOF” Error in Optimizer window when “Get Elevation Parts” is clicked. Problem is caused by a table that should contain job part numbers being empty. Either there are no part numbers at all to optimize, or the Elevation Frame Systems need to be edited, so that the parts can be saved again to the job parts table.

• Fixed problem when you try to print the Labor Summary report more than once in a row.

• Moved total for Perimeter Caulking on Labor Report from Miscellaneous to Installation labor column since the minutes value was moved to that side of the settings screen.

• Fixed bug when trying to Cancel out of adding an elevation to a job. Program would get stuck in a loop even if you tried to continue and add the elevation.

• Added “Change Color” button to Jobs window to make it easier to change the finish color for a whole job.

• Add check and message for when you try to add a door leaf without a door frame. Door frames must be added before a door leaf.

• Added option to select a vendor every time the program opens. See the setting in the System Defaults window.

• Switched Left and Right Height fields in Elevation Glass printed report to match the order of the report on the screen.

• Fixed problem where Misc job parts were not getting deleted when an elevation is deleted from a job.

• Fixed error in Final Glass report with no prices, when Miscellaneous glass is used in a job. Fix is in v15113Patch.exe (08-31-09) at the bottom of the Program Download page.

Fixes in v15.1.12

• Fixed error generated from deleting the job you have open, then trying to open a different job.

• Corrected problem with null error when editing a door leaf that has no data in it.

• Corrected problem where SubFrame door frames where not showing up without hitting Clear Filter button in Door Frames window when selecting a door frame for an elevation.

• Fixed calculation of glazing vinyl where rounding was making the number too high.

• Fixed “All Panels” check box when Excluding frame members from an elevation. Checking the box now excludes all head and sill pieces after only selecting one.

• Added note to Exclude tab so you know when checking the “All Panels” box, that this option only works for head and sill pieces.

• Changed Exclude tab to leave Add frame open until close button is clicked. Excluding multiple components will be easier now.

• Fixed error after copying a job in a given vendor where selecting the copied job gave an error about having to pick a framing system.

• Fixed Door Leaf Edit button in Entrances window.

• Added “Vinyl” to Part Type drop down list in Parts List window.

• Fixed problem with Continuous Head setting of framing systems. The jamb were showing as running through the continuous head, and rake tops with continuos heads were not drawing correctly.

• Fixed “Object Required” error when trying to Backup multiple jobs.

• Corrected Final Summary report from printing a blank page.

• Corrected problem with transom glass stop getting cut short by the amount of its profile.

• Moved Perimeter Caulking labor time from the Miscellaneous box to the Installation box in the “Frame Labor Hours and Rates” window. Perimeter caulking is calculated by using a time per foot value.

• Pressure Plate labor is now calculated based on lineal feet of face material in a job. Minutes per foot of pressure plate labor should be entered into the labor defaults window for a curtain wall frame type.

• Fixed potential error when editing and processing frame labor for a job.

• Corrected problem with continuous head material along with a window at the head. Head material was getting omitted.

• Fixed problem with calculation of Window Area in statistics box.

• Fixed problem introduced by a previous fix to vertical cut lengths when Stepped Top elevation.

• Made Caulk Joint settings in Framing System Parts window invisible until those settings are utilized by the program.

• Fixed an EOF or BOF error in the optimizer when closing it.

• Fixed problem with Add/Deduct for vertical and jamb material not recognizing the check boxes to apply these settings or not.

• Fixed problem with Add/Deduct for vertical and jamb material not recognizing the check boxes to apply these settings or not.

• Fixed problem that can occur when an elevation frame is changed in the Elevations window, and the Close button is clicked instead of clicking “Edit Drawing”.

• Changed second paragraph in Entrances window to new wording.

• Fixed problem with Alternate Vertical material not being included with splice vertical cuts.

• Fixed error when trying to open Optimizer after editing an Alternate Vertical part.

• Fixed problem with head material when a continuous head and a window at the head exist.

• Fixed Markup report that shows job costs only. Material and labor totals did not show markup and surcharges.

Fixes in v15.1.11

• Fixed “3704 Error” when opening the program. This was somehow caused by the “Show Detail Bubbles” box being checked in the Layout tab of the drawing window.

• Fixed joint count in tall elevations, when elevation has splices. The splice won't be included in the joint count, but they will be accounted for in figuring splice hardware.

• Fixed strange error “91” in DoorParts window caused by too many parts trying to load in the “Per Door Leaf” column.

• Tried to correct strange problem where Elevation data would get wiped when opening a job.

• Fixed typo in Export Options window in the “Export to a PDF” title.

• Fix Null Erro bug when trying to print Labor Summary report from Print Reports window, and labor has not been processed.

• Fixed “Final Summary Screen is already open” message when trying to print Final Summary report from Print Reports window.

• Fixed bug with adding parts to Final Parts report. “Insert Part” button shows up again when the parts list is opened by right clicking on the add part window.

• Fix bug when trying to update price of a manually added part to the Final Parts report.

• Added code to prevent Job Name from getting dropped from Cut Pieces table that contains all cut parts for a job. This prevents an error when Optimizing with no job name.

• Fixed Rake top cuts. Jamb and Vertical cut lengths were not the right size on all elevations.

• Added code to update Edit Date field for Jobs when Height, Width, and Number of Panels is changed in an elevation.

• Fixed problem where the original records that were Saved in Optimizer Cuts list were getting added back to the list after the “Get Elevation Parts” button was hit again. Now saved parts remain, and the original parts do not come back.

• Fixed “Data Access Error” when clicking on a record next to a delete part in the Parts List.

• Corrected problem with stock parts that are only one color when used in a job that has a different color. The program will now find the first available price for that part moving from left to right through the finish colors.

• Fixed bug in Elevations form where deleting multiple elevations freezes program.

• Changed behavior of clicking on a row in the Jobs window. Previously, the entire row would be highlighted, now just the cell you click on will be. Editing the job name is easier this way.

Fixes in v15.1.10

• Fixed problem with selected a different job in a vendor that is already open.

• Fixed problem with Can/Stick type systems for calculating labor.

• Fixed possible Null value error when trying to edit a blank door frame.

• Added Glass Stop cutting option to Drawing Settings window.

• Fixed erroneous “Job not selected” message when adding a new job.

• Fixed problem with glass in a window above a door with multiple horizontals.

• Fixed problem with head piece when a window is used in conjunction with different panel heights.

• Corrected vinyl calculations so that the number of feet is rounded up in all cases.

• Added feature to all you to choose the Default CAD program that WinBidPro uses.

• Fixed Delete command in PartsList to work with PartID and not Partnumber. This will allow a duplicate part to be deleted, without removing both parts.

• Fixed problem with * in Framing System Parts window. The * quantity of a one part number for a component would get applied to the other parts for that component when the form was closed.

• Fixed Error 3265 when trying to print Final Glass report that uses a Miscellaneous glass type in a job.

• Fixed problem with Vinyl calculations when multiple quantities (*) were used on different vinyl parts for a given component.

• Fixed problem when the “Cancel” is clicked in the Add Final Part window when trying to add a part to the Final Parts report. Final Parts list would only show one part.

• Corrected “Insert Part” button from showing when adding a part (and right clicking to open the parts list) to the Final Parts report.

• Added Hours column to Labor Summary report.

• Added Total Cuts count to Final Summary report.

• Added Sum totals to Stock Length list in Optimizer window for Amount Used, Drop, and added average for Yield. You must drag a column head to the top of the list to see these totals.

• Corrected problem with glass in a Window spanning two panels and a horizontal in the middle. The glass was not calculating at the right size.

• Fixed rare problem with the head material when a window is used in conjunction with a lower panel height in a panel where the window exists, but is not the lower height.

• Changed VCAD link on menu tree to CAD because you can now set your own CAD program to open when that link is clicked. Use the “Settings” link under the Shopdrawing menu option to do this.

• Added a check to see if a Door already exists in the selected panel. This will prevent two doors from being added to the same panel.

• Fixed dimension to top of window when this height is the same as the top of the elevation. This dimension is already displayed on the left side of the drawing.

• Added Note to “Add Entrance” window in the Doors tab to remind you that a Door Leaf can only be added after a Door Frame has been added.

Fixes in v15.1.9

• Fixed Per Lite at Head Misc part calculation.

• Fixed Face Cover Vinyl calculation.

• Made Print Lineal button invisible when Stock List is maximized in Optimizer.

• Fixed problem with head piece not drawing right with different height panels.

• Fixed problem with part not deleting from Glass Table unless whole row was highlighted.

• Fixed problem with Job Name not showing correctly at footer of main window.

• Fixed problem with Sub-Frame entrances causing remaining equal panels to be calculated incorrectly.

• Fixed Labor total calculation for Job Summary. This might have generated an error in some cases.

• Updated error handler in Optimizer to clear stocks list if there was a problem optimizing a job.

• Fixed label on navigation tool at the bottom of the Frame Labor Defaults window.

• Added code to update Frame Type in Glazing labor table of master database to 'Can/Stick' from 'Can System'. Will fix the values for this type from not showing up in labor defaults.

• Fixed 2nd part of problem in item 11. Changed frame type name to 'Can/Stick' from 'Can System' in Frame Glazing Settings window.

• Add ToolTip notes to the Exclusion and Markup Notes fields in the System Defaults window.

• Corrected problem with glazing labor not calculating for some sizes and types of glass.

• Fixed problem with Height feature in elevation drawing tabs. Certain panels did not work correctly.

• Fixed Spandrel and Vent totals at the bottom of the Final Glass Reports. Also added the Miscellaneous glass type to the totals area.

• Fixed double click on detail name for stock length part to browse for a detail file. The whole path was being saved, but the program only needs what's after the “Vendor Details\” folder name.

• Add command button to Height tab in main screen to select panels instead of having an all panels and selected option. Changing the height of all panels should be done in the layout tab.

• Fixes in v15.1.8

• Fixed Section Bid notes on printout of Markup with no Cost.

• Prevent error in Round16th sub by adding default to Case Else.

• Fixed error when minimizing web page called from inside GDS.

• Fixing problem with transom header on sub frame door elevation.

• Look at bug with rake top with splits at the head.

• Add rounding to Vert and Jamb cuts so that raked pieces are saved correctly.

• Fixed Joint count for entrances with sub frames.

• Fixed Weather Stripping for door frames.

• Made Optimizer show added cut pieces and stock lengths while these parts are being added, not after the add window is closed.

• Fix problem where Lineal pricing not showing up in the Markup report correctly.

• Added a Rake? Column to FinalGlass Report printout.

• Fixed Window (Transom) glass above a door spanning more than one panel.

• Fixed Per Entrance part calculation in Framing System Misc parts tab.

• Added feature to double click on detail name field to open Browse window for a detail file name.

• Added same detail Browse feature to Door Parts window.

• Added same detail Browse feature to Door Frame Parts window.

• Add a drop down list to part list for Part Type codes.

• Fixed problem with splice hardware not calculating for alternate verticals, and full stock length splices.

• Fixes in v15.1.7
• Fixed Splits in tall elevations, should cut horizontals, head, and glass correctly

• Fixed Add New glass to Glass Table. Sets default Glass Type, and Labor Code

• Fixed error when “Reports” button was selected in the Final Summary window

• Fixed Arch Head cut size and Arch Glass size in elevations with Arches

• Removed Vendor Name from Glass Reports

• Fixed problem with parts not having the “Part Type” assigned in the Parts List from being left off of the Final Summary and Markup Reports. This problem also occurred with manually added parts. The program will now automatically assign a “Type” to these parts during the processing to ensure they are accounted for. The “Part Type” is mainly used as a reference for locating and sorting parts in the Parts List itself

• Fixed “Edit Job Parts” feature in Jobs window. A bug introduced in the last update was showing entire parts list

• Fixed problem with Door Header Transom Stop getting cut wrong when splits are added to the same panel, but at higher horizontals

• Fixed problem with Filter Bar in "Copy to Vendor" window when copying a job to another vendor. A message saying there are no frames, doors etc. would appear if you typed text into a filter field that couldn't be found in the list

• Fixed problem with Section Notes not printing on Markup report without costs.

• Fixes in v15.1.6
  - Slider wouldn't always correspond to the right elevation (also - shopdrawing moves the slider back to the right elevation).
  - Fixed 380 shopdrawing error after hitting the "Next Set" button (leaves a blank tab sometimes, may need a little more work)
  - Fixed overlapping elevations with many horizontals on tall buildings (still needs more work but works good)
  - Fixed problem with "Not to Scale" message overlapping the "Frame #" description on the screen
  - Now, the shopdrawing sheet sizes work again. With the last few updates it would only work with 8 1/2 by 11
  - Now, the shopdrawing B & W printing works again. With the last few updates it would only print in Color
  - New shopdrawing feature. If there is only one elevation per tab then the drawing is exploded. If there are multiple elevations, then each one is grouped so each could be easily re-arranged
  - Spead up the process of getting "detail drawings" of a job if it contains a lot of elevation, door, frame, or doorframe details
  - Fixed problem with split in elevations taller than a stock length
  - Fixed Glass Tab so that the pointer in the glass table moves to the current type of glass, or if a new elevation, the previous elevations glass type
  - Fixed the slider control to work more consistently
  - Fixed Perimeter Feet and Area calculations with elevations using doors and bulkheads
  - Door frame filler material will not get calced if door is in first or last panel
  - In Job List Window, added Descending order to sort for Edit Date
  - Corrected problems when changing multiplier in Final Parts with "Change a Group" button
  - Fixed totaling in Final Parts when multipliers, quanitities and/or pricing is changed
  - Removed Frame # from elevation drawing
  - Added descriptions to title bar in Door Parts and Door Frame Parts windows
  - Fixed problem with Door frame costs not showing up in Final Summary
  - Added blanking and zeroing capabilities to Batch Updater in Parts List
  - Fixed Glazing Men values in Labor Defaults window so that the number of men for 1/2in./Insulated glass is in whole numbers. The .5 men is still a valid number for small pieces of glass (For existing users, these changes can be made by you in the Labor Defaults window)
  - Fixed problem with glazing labor not calculating for Can/Stick systems

• Fixes in v15.1.5
  - Corrected a problem created when the sort codes for elevations in a job get out of order. You can now change the sort codes in the Elevations window if you want to change the order of the elevations.
  - Fixed Lineal Parts Report to round up to the nearest foot for all stock length parts.
  - Corrected a problem where adding a multiple for a part number in the framing system window (ie. a *2 after the part number) was applying that quantity to other parts in the same column
  - Fixed problem where Horizontal vinyl wasn't getting calculated when alternate horizontals were being used
• Fixes and Additions in v15.1.4
  - Fixed problem with door jambs with a sub-frame entrance and no alternate verticals
  - Fixed error with Final Summary report. An error would occur when opening sometimes
  - Fixed a problem with imported jobs from previous version where final glass report was bloating glass quantities. The cause of this problem was fixed in the .3 update, but now the glass phantom glass won't show up in the report even if it is in the database
  - Added Job Area and Perimeter columns to Elevations list (you will need to skip through each drawing in a job created in earlier versions in to correct the total Area and Perimeter in the Final Summary and Markup reports)
  - Moved Edit Date field in Jobs list next to the Bid Date column.

• Fixes and Additions to v15.1.3
  - Fixed bug when copying a job to a new job and to a new vendor. The glass was not showing up in the new job's elevations, but it would show up in the Final Glass Report
  - Face caps are now cut between jambs instead of wall to wall
  - Spliced vertical members do not affected the number of "per vertical" parts for a framing system
  - Scaled drawing printouts should now be true to scale. Be sure to click "Restore Defaults" in the Drawing Settings window to reset the scale factors. Print button in Toolbar on drawing window will print with "Fit to Page" scaling unless you change it
  - "Per Horizontal 2" and "Per Horiz 3 & 4" part fields have been added to the Misc tab of the Framing System Parts window
  - Alternate Verticals parts will now show up for alternate door jambs in a sub-frame entrance
  - Impact Glazing was added to glazing labor and Impact was added to the Frame Type for labor. Be sure to check defaults for this new category when using it for labor
  - When using Lineal Foot parts report in the Optimizer, the total for this report will now be added to the Final Summary and Markup reports
  - Perimeter feet and Area value were corrected in the Markup Report printout
  - Fixed a problem with Splits in the transom above a sub-frame door
  - Program will go to the Layout tab when switching jobs and vendors, regardless of the tab you were on when you switched
  - Fixed Minimum Square Foot calculation in Final Glass Report
  - Fixed glass sizes when a Rake that is low on the left side and high on the right is used
  - Added "Tip" button to Framing System Parts window, and Drawing Settings window
  - Fixed bug in the "Job and Elevation Settings" tab of the Frame Labor Hours and Rates window. The Glazing Labor will now update when changing elevations with the arrow control on the first tab
  - Fixed Filter Bar in Final Glass Report window. Not when this stopped working

© 2008 Infinitive Solutions, LLC. All rights reserved.